Water Main Spray-On Epoxy Pipe Lining Restores Corroded Pipes For 50 Years!

High pressure potable water main lines corrode over time losing pressure and water 24 hours a day. Excavation is time consuming, expensive, invasive, messy and involves a long downtime. Spray on epoxy lining can restore up to 700 feet of water mains in just hours.

Large Diameter SPRAY-ON Epoxy Pipe Lining In Water Mains

Water main restored for 50 years with epoxy pipe lining

Water main restored for 50 years with epoxy pipe lining

Depending on pipe condition, diameter and strength, either a spray-on epoxy or pipe lining fabric soaked in epoxy is used to restore the potable water lines, sewer stacks, fire suppression lines or heating/cooling pipes.

With our Robotic Spray-On Application systems, we offer the most advanced epoxy pipe lining system available anywhere. This technology has been successfully used for hundreds of miles of underground water mains worldwide. This superior epoxy application process can reline large-diameter pipes up to 60 inches and can go up to 700 linear feet in one pass. This allows for water mains to be restored without ripping up streets. The system is capable of applying multiple products and can be used for fuel lines under airport tarmacs.

Where Can Our Epoxy Pipe Lining Be Used?

We have revolutionized pipe restoration and has elevated industry standards with the introduction of our proprietary Robotic Spray Application systems designed for horizontal and vertical pipes which allows any pipe in high rise and low rise buildings to be relined with the same absolute precision as our Robotic Spray Application for underground pipes.

Epoxy pipe spray inside vertical stacks in high rise buildings

This highly specialized technology, developed by a special team of engineers, has never been available until now. No other company offers you the expertise and technology our team brings to each job, nor do they deliver the high level results. Our computerized system will calibrate and apply varying thicknesses of epoxy in the same pipe and can adjust to accommodate fittings. The end result is a uniform, perfectly smooth lining that improves and increases efficiency and prevents costly leaks, all without disturbing encapsulated building columns and ceilings. Pipes can be lined up to 700 feet at a time.

Before and after small diameter epoxy pipe liningWhether it’s being applied to a fire suppression system, HVAC system or a waterline, the unique characteristics of our epoxy make it possible to line longer lengths of pipe through elbows, tees and unusual system constructs. And of course, there is never the disruption or cost associated with traditional pipe replacement.

Advantages Of Epoxy Pipe Relining In Water Mains

COST EFFECTIVE

Replacing pipes is 50% to 75% more expensive than lining them. Lining is a non-invasive process. There is no destruction to buildings or landscape. Reconstruction costs for repiping can be 60% of direct pipe repair costs and epoxy lining eliminates the need for reconstruction. Over time, up to 75% of the original flow capacity can be lost as result of corrosion leading to much higher energy bills. Restoring those pipes reduces energy costs.

SAFE AND DURABLE

Our epoxy spray systems provide a safe and protective barrier between the pipe and the water,which prevents harmful elements from leaching into the water supply. We use a chemical resistant, non-toxic epoxy lining which has (NSF/ANSI-61) certification that is approved for drinking water. Testing engineers estimate the life expectancy of the epoxy is roughly 50 years.

MINIMAL DOWNTIME

In all cases, epoxy lining takes a fraction of the time of traditional repiping methods.

MINIMAL DISRUPTION AND NO OCCUPANT DISPLACEMENT

Belco’s pipe restoration process is quick, quiet, non-invasive, and rarely requires displacement of a building’s occupants. When needed, temporary bypass water systems are quickly installed to provide uninterrupted water service so that occupants, businesses, and clientele may continue business as usual.

VERSATILITY

Epoxy lining can be applied in any metal pipe in any building, structure, or environment, above or below ground. This approach is used in the piping systems of hotels, high-rise condominiums, hospitals, restaurants, airports, schools, museums, U.S. Navy ships and commercial and industrial businesses. Our solution is available for potable water pipes as well as hot water re-circulation systems, fire sprinkler and fire suppression systems, chiller lines and HVAC systems.

Google+
Contact Us

    Your Name:

    Your Email:

    Address:

    City, State, Zip:

    Phone:

    Questions/Comments:

    How long does cast iron last.
    Pipe replacement options
    Cost
    Why backup
    Picote add pic
    Harbor House
    Naples, FL
    SERVING THE FOLLOWING AREAS:
    Tampa
    St. Petersburg
    Sarasota
    Venice
    Cape Coral
    Naples
    Miami
    Fort Lauderdale
    West Palm Beach
    Port St Lucie
    Delray Beach
    Boca Raton
    Pompano Beach
    Hollywood
    Coral Gables
    Fort Myers
    Port Charlotte
    Orlando
    Clearwater
    Longboat Key